2) blinking empty battery indicator – Canon EOS A2E User Manual
Page 128
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Liquid Crystal Display/Battery Notes
1) LCD Information
The LCD panel uses liquid crystal to show expo
sure information. After about five years, the dis
play may become difficult to read. If this occurs,
have it replaced at an authorized Canon service
facility. Replacement is at the owner’s expense.
Liquid crystal may also respond relatively slowly
in temperatures below 32°F/0°C. It may also dar
ken in temperatures of around 140°F/60°C. The
LCD panel will return when the temperature re
turns to normal.
2) Blinking Empty Battery Indicator
There are two situations in which the blinking
empty battery indicator will appear in the LCD
panel: (1) when the battery is nearly exhausted or
(2) when the camera's self-test process detects
an internal malfunction. If the blinking empty bat
tery
indicator
appears,
perform
the
following
operations:
1.
Remove the battery, wipe the battery terminals
and reload it. Check the battery again. If the
blinking still appears, replace the battery with a
new one.