Automatic film speed setting, Manual film speed setting – Canon EOS A2E User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic film speed setting
When DX film is loaded, the film speed is set
automatically according to the DX code on the
film cartridge.
•
The automatic film speed setting range Is
ISO 25-5000.
• If non-DX film is loaded, the ISO indicator
blinks in the LCD panel.
•
The currently set film speed can be checked
by pressing the function button so that ISO is
displayed In the LCD panel.
Manual film speed setting
The film speed can be set manually when using
non-DX film or when you wish to set a film
speed other than the DX-coded film speed.
1) Set the command dial to a creative zone po
sition.
2)
Press the function button until ISO is dis
played in the LCD panel.
3) Turn the main dial to the desired film speed.
* The setting Is completed when the shut
ter button is pressed halfway or after six
seconds elapse.
15