Canon EOS A2E User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1) Set the quick control dial switch to I
2) Focus the subject and confirm the expo
sure.
3) Turn the quick control dial to set the
desired exposure compensation amount.
*
The compensation amount is displayed
in the LCD panel and viewfinder, “-i-”
compensation
overexposes
the
sub
ject
and
compensation
underex
poses it.
*
After
setting
the
desired
compensation
amount, it is a good idea to set the quick
control dial switch to O to prevent ac
cidental alteration of the setting.
4) Take the picture.
*
To cancel exposure compensation, re
peat step 3 to return the compensation
amount to 0, then set the quick control
dial switch to O.
33