Canon EOS A2E - Manual (Page 68)

1) Press the function button so that “ <§> ”
appears in the LCD panel.
2) Turn the main dial to select "1 ” or “0” in the
LCD panel.
1: Red-eye reduction on. <§> is displayed
in the LCD panel.
0; Red-eye reduction off. <§> is not dis­
played in the LCD panel.
A lens hood attached to the lens will block
light from the built-in flash. Always remove
the lens hood when using the built-in flash.
The built-in flash and an external flash
cannot be used together.
The built-in flash will not operate when an
external flash unit or cover is attached to
the accessory shoe.
If the built-in flash is held down while the
flash button is pressed, ■tzzi will blink in
the LCD panel and the camera will stop
operating. This is not a malfunction. Press
the shutter button halfway to resume nor­
mal operation.
37