Canon EOS A2E User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1) Move the command dial to a position other
than “ H
2)
Open the back cover by sliding the back
cover latch down.
3)
Insert the film cartridge with the flat end
facing up and the bottom end entering the
camera first.
4)
While
holding
down
the
film
cartridge,
carefully
pull
the
film
tip
across
until
it
reaches the orange mark.
5)
Aftercheckingthatthefilm
lies
flat
and
that
the tip is aligned with the orange mark,
close the back cover.
•
The
film
automatically
advances
to
the
first
frame,
the
frame
counter
shows
“1”
and the film cartridge symbol ( @ ) is
displayed in the LCD panel.
•
If the film cartridge symbol blinks, the film
is not loaded correctly. Reload the film. If
the film is not loaded correctly, the shutter
will not release when the shutter button is
pressed.
13