Press (+) and (—) buttons to scan day display, Press shift button when correct day is shown, Press ( + ) and (—) buttons to scan hour display – Canon E850 User Manual
Page 19: Press shift button when correct hour is shown, Press ( + ) and (—) buttons to scan minute display, Press shift button when correct minute is shown
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 2 : 0 0 A M
J U L . 1 9 9 1
Press (+) and (—) buttons to scan day display.
• The camera knows the number of days in each month and which years are
leap years.
1
2
3
....... 29
30
31
c
8
SHIFT
10
SHIFT
1 2 : 0 0 A M
J U L . 1 9 9 1
2 : 0 0 P M
J U L . 1 9 9 1
2 : 0 0 P M
J U L . 1 9 9 1
Press SHIFT button when correct day is shown.
• Date is set and hour display flashes.
Press ( + ) and (—) buttons to scan hour display.
• Hour display rotates through 24 hours.
-12AM 1AM <-► .......... 10PM 11PM-
□
Press SHIFT button when correct hour is shown.
• Hour is set and minute display flashes.
11
2 : 3 5 P M
J U L , 1 9 9 1
Press ( + ) and (—) buttons to scan minute display.
• Minute display rotates through 60 minutes.
00
01
02
....... 58
59-
□
12
SHIFT
2 : 3 5 P M
J U L 1 9 9 1
Press SHIFT button when correct minute is shown.
• Minute display stops flashing and auto date and time starts functioning.
• Press DATE button to make display disappear from viewfinder.
Notes:
• Date and time cannot be set during camera recording or playback.
• When you change or remove the lithium battery, be sure to connect a power source to the camera, otherwise
date and time will be cleared from memory.
• Reset date and time when you travel to a different time zone.
• Date and time have the same colour as the character title (see p.55).
C am era P reparations 17