Camera recording, Attach power source, Turn camera on – Canon E850 User Manual
Page 20: Press eject button, Press tape speed button to select tape speed, Turn grip for easy handling, Press start/stop button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera Recording
Attach power source.
• When using a battery pack, make sure it is fully charged (see p.9).
Turn camera on.
• OPERATE/CAUTION indicator lights up.
EJECT
Press EJECT button.
• Video cassette compartment opens.
4
Push
□
/■---------
0
0 0 : 0 0
PAUSE
\__________
TAPE SPEED
[SPj/LP
>
SP
_______ ^
Load video cassette and close video cassette
compartment.
• Insert with window facing out.
• Camera goes into record pause mode.
• If erasure prevention switch is set to “save”, camera goes into stop
mode (see p.2I).
Press TAPE SPEED button to select tape speed.
• For best picture quality, select SP.
• For double recording time, select LP.
Turn grip for easy handling.
• See p.l5 for adjusting grip.
Press START/STOP button.
• Recording starts.
• Tally lamp flashes rapidly and “REC” appears in viewfinder.
• See Advanced Functions section for information on making your
recordings more effective (pp.36—61).
18
r
0 : 0 12 3 '
PAUSE
V-
>
Press START/STOP button again to temporarily pause
recording.
• Press START/STOP button once again to resume recording.
• See “Record Review” (p.23) to check your recording.
B asic O perations