White balance lock procedure, Press awb/lock button, Make your recording – Canon E850 User Manual
Page 39: Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
White Balance Lock Procedure
Point camera lens at a white object (such as a sheet of
paper) for 10 seconds, so that it completely fills viewfinder.
• Set zooming lever to telephoto end.
• Be sure sufficient lighting is available.
• There is no need for focusing.
lAWBI /LOCK
Press AWB/LOCK button.
• “WB LOCK” appears in viewfinder.
Make your recording.
AWBl /LOCK
Press AWB/LOCK button again to reset auto white balance.
• “WB LOCK” display disappears from viewfinder.
Notes:
• White balance lock clears automatically when playback is activated or the camera is turned off.
• Reset white balance again if the light source changes during white balance lock.
• Use white balance lock even under normal lighting conditions to achieve a more precise colour balance.
White Balance
37