Selecting video channel, Turn tv on, Turn camera on, and start playback – Canon E850 User Manual
Page 31: To view a regular tv programme
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting Video Channel
Video channel means the channel in your area which is not used by a
broadcasting station, and can be used for playback of video cassettes
(Channel 0 or 1). If your TV does not have audio/video input terminals,
your TV set and the Video Channel Selector of the RU-lOO RF Unit must
be set to the video channel in order to view playback.
Turn TV on.
Turn camera on, and start playback.
Set TV and Video Channel Selector to video channel (Video
Channel Selector is factory-set to CH 1) using a flat-edge
screwdriver.
• For example, if video channel in your area is channel 0, set Video
Channel Selector of RU-lOO to CH 0, then tune TV to channel 0. Adjust
by turning until picture is clear.
To View a Regular TV Programme
The RU-KX) RF Unit has an automatic signal selector which selects the
signal from the video camera whenever the camera is connected to the RF
unit and the power is turned on. To view a regular TV programme,
disconnect the camera from the RF unit, or turn the camera off.
P layback C onnection Procedure
29