Playback procedure, Turn camera on, Stop press stop button – Canon E850 User Manual
Page 32: Rew ^ locate piayback start point, Press play button to start piayback, Press stop button to end piayback, Turn camera off
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playback Procedure
I
operate
Before playback, make sure that all connection procedures are completed
(pp.24—29).
Turn camera on.
EJECT
Press EJECT button.
• Video cassette compartment opens.
Push
Load video cassette in camera and cióse video cassette
compartment.
• Camera goes into record pause mode.
• If erasure prevention switch on the video cassette is set to “save”, camera
goes into stop mode (see p.21).
STOP
Press STOP button.
• You must complete step 4 to commence playback.
Playback functions will not operate if you haven’t pressed STOP button.
REw ^ Locate piayback start point.
(1>C>) • Use FF or REW buttons to locate start point or use high-speed search
(see p.32).
PLAY
Press PLAY button to start piayback.
• You can also monitor playback in viewfinder.
• Tape speed is selected automatically.
STOP
Press STOP button to end piayback.
• The tape rewinds automatically if it is played to the end (automatic rewind
function).
8
OPER.
30
B asic O perations
Turn camera off.
• OPERATE/CAUTION indicator goes off.