Canon PowerShot 350 - Manual (Page 23)

Recording/Playback time
capacities
Recording Playback
Alkaline
batteries
Approx.
30 mins. Approx.
60 mins.
Rechargeable
Nl-Cd batteries
Approx.
50 mins. Approx.
80 mins.
Depending on the operating conditions and
the type of batteries used (particularly when
using alkaline batteries), these figures will
vary.
Remaining images counter
The display showing the remaining
number of images that can be taken by
the camera alternates between on and off
with each press of the REMAIN/NO.
button.
A blinking “0” means no more images can
be stored on the card. Delete any
unwanted images or replace the CF card.
N 10
^-------►
3 Set the Normal/Macro lever to
NORMAL.
NORMAL
A
Check the lever is set to Normal.
5 When taking successive
images, press the shutter
button after the LCD panel
display has returned to
normal.
o
Notes/TIps
• You cannot take the next picture until the
display returns to normal after the shutter
button is pressed. (While the camera records
and displays the image.)
• The flash fires automatically in dark
conditions. (-*'28)
• When using battery power, the power is
automatically turned off if you do not use a
camera function for one minute. (Auto Power
Off function)
To use the camera, slide the power switch to
turn the camera on again.
• Never disconnect the AC adapter, or change
the batteries, immediately after pressing the
shutter button (while the camera is saving
the image data to the card). This can
damage the formatting information for the
Adjusting the angle of the LCD panel
Adjust the angle of the LCD panel so that
you see the image clearly. You can adjust
the LCD panel to an angle of up to 40°.
23