Mounting a lens, Remove the caps, Mount the lens – Canon Rebel T2 300X User Manual
Page 15: On the lens, set the focus mode ^ switch to <af, Detaching the lens, Mounting and detaching a lens
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting and Detaching a Lens
Mounting a Lens
1
Remove the caps.
• Remove the rear lens cap and the camera
body cap
Mount the lens.
• Align the red dots on the lens and camera
and turn the lens as shown by the arrow
until it snaps in place.
^ On the lens, set the focus mode
^
switch to <AF>.
• If the focus mode switch is set to <MF>,
autofocus will not operate
Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by the
arrow.
• Turn the lens until it stops, then detach it.
1^ •
Keep
the
caps you wHL not lose ihem
•
stands lor "Auto Focus,''ard<hF> stands for "MaoLis] Fbous."
• An EF^ tens cannot be attached
10
the cafners.
13