C.fn-02 af point sejection method, C.fn^w emission of bullt'in af-assist beam, In av mode – Canon Rebel T2 300X User Manual

Page 50: Hsnsetting custom functions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HSnSetting Custom Functions*

C.Fn-02 AF point seJection method

0 : Press AF point selection button, then press the cross keys.

1 : Press the shutter button halfway, then press cross keys.

Effective during the <(2»4> and <(j>6> active times
Pressing the <GE> button switches to automatic AF point selection

C.Fn-03 Switch to centre AF point with AF point selection
button

0 : Disabled
1

:

Enabled

C.Fn^W Emission of bullt'In AF-assIst beam

0 : Enabled

1 : Disabled

C.Fn-05 Shutter curtain sync with buiit'in flash and EX'
series Speedllte

0 : 1st-curtaln sync

1 : 2nd-curtaln sync

With second-curtain sync and a slow shutter speed, you can create a light

trail following a moving subject The flash fires right before the shutter

closes. Second-curtain sync can be set even with EOS-dedicated

Speedlites which cannot switch the shutter curtain synchronization. The

Speedlile with a shutter curtain synchronization setting will override the
camera’s setting
*When you press the shutter button completely, a preflash will be fired for flash

exposure control.

In Av mode

0 : Auto

1 : 1/125 sec. (fixed)

When you use flash in the aperture-priority mode (Av). the flash sync speed
will be fixed at 1 /125 sec. This prevents the camera from setting a slow sync
speed in low-light conditions.

48

Advertising