E±!l selecting the af point – Canon Rebel T2 300X User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The AF point is used for focusing. The AF point can be selected automatically by
the camera or manually by you In the Basic Zone modes and
<A*DEP>
mode, the
AF point selection is automatic only. In the
<P><Tv> < Av> <M>
modes, the
AF point can be selected either automatically or manually.
• Automatic AF point Selection
The camera selects the AF point automatically according to situation
* Manuai AF point Seiection
You can select any of the seven AF points manually. This is best when you want
to be sure to focus on a particular subject, or to compose a particular shot
quickly.
E±!l Selecting the AF point^
Press the <S3> button. (d6)
► The currently-selected AF point will light.
FI
Select with cross keys
Automatic selection
i
I.
!-<>•[> Kj- ^
Automatic selection
Select the desired AF point.
• While looking at the AF point on the LCD
panel or in the viewfinder, press the cross
keys to select the desired AF point.
• To select a horizontal AF point, press the
left or right cross key. To select a vertical
AF point, press the top or bottom cross
key.
• You can also turn the <|^> dial to select
an AF point.
• If all the AF points light, automatic AF
point selection will be set.
• Press the shutter button halfway to return
to shooting.
29