Take the picture, The wtefence between <p> and, Program ae – Canon Rebel T2 300X User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
Program AE
Take the picture.
• Compose the shot and press the shutter
button fully.
• If
“30'
and the maximum aperture value blink, it incicates
underexposure. Use flash.
« If “HOOfT and the minimum aperture value blink, it indicates
overexposure. Use an hD filter to reduce the light entering
the lens.
The Wtefence Between
<P>
and <□>
' The shutter speed and aperture value a№ set in №e earre way in both modes.
<
The foilcDAitng features can be used irr the
<P>
mode, but not in the <0>
mode.
• Manual selection oi AF mode and AF
poini
• Film advance mode selection
• Program shift
• Exposure compensation
• AEB
• Custom Function
About Progrm Shift
• In the Program AE mode, you can freely change the shutter speed and
aperture value combination (program) set by the camera wNIe retaining the
same exposure. This is call^ program shift.
• To shift the program, press the shutter button halfway and turn the dal
until the desired shutter speed or aperture value is dsplayed.
• Program shift is canceled automatically after the pkture is taken.
• Program shift canrK^t be set when the built-in flash is used.
• Deprh-of-fteld preview
• AE/FE lock wilh the <■)(■> button
' Multiple exposures
* Built-in flash manual firing and flash OFF
* High-speed sync (with EX-series
Speedlites)
34