Canon Rebel T2 300X - Manual (Page 7)

Batteries
• Before installing the batteries, wipe the battery contacts to remove any
fingerprints and smudges This is to prevent faulty connections and corrosion
• Never disassemble or recharge the batteries Also, never store a battery in high-
temperature places or short circuit the battery contacts or toss a battery into a
fire.
• Although the batteries work well even at low temperatures, battery performance
may decline slightly at freezing temperatures. In such a case, keep spare
batteries warm in a pocket, etc , and use and warm the batteries alternately
How Low Battery Levels Affect Camera Operation
On the LCD panel, if the <G> icon blinks or it is not displayed, a proper exposure
can still be obtained as long as the shutter releases However, when the battery
level is low, film advance and auto rewind might stop midway or not work at all
and <G> icon may blink on the LCD panel. After the batteries are replaced with
new ones, film advance will be possible and film rewind can resume by pressing
the <Qdl> button.
Lens Electrical Contacts
After detaching the lens from the camera, pul on
the lens caps or put down the lens with the rear end
up to avoid scratching the lens surface and
electrical contacts.
Contacts
Safety Precautions
. Do not look directly at the sun or any other strong light source through this lens
or through a camera with the lens attached as this could cause damaged
eyesight. Take particular care r>ot to look directly at the sun through the lens
alone as this can cause blindness.
Do not leave the lens or an SLR camera with the lens mounted in direct sunlight
with the lens cap removed This is to prevent the lens from magnifying the sun's
rays, which could cause fire.