Canon Rebel T2 300X - Manual (Page 18)

U • The shutter curtains have been manufactured with very hi^ precision Never
touch them with your fingers. When loading film, do not touch or dam^e the
curtains with your fingers or film.
• In hot and humid environments, do not remove the film packaging until you eu* *e
ready to load the film.
• Infrared film canix)t be used with this camera
©Loading and Unloading Film
a
If the film is not loaded fxc^Derly, the <@> icon will Uink on the LCD panel and
the shutter will not work. ReloaJ the film cartridge properly.
Unloading Rim
After the film’s last frame is exposed, the camera rewinds the film automatlcaHy.
After the film is rewound, there will be a
shutter-release sound. Check that the < @ >
icon is blinking on the LCD panel, then open
the back cover and take out the film
cartridge.
Q^MIdroll Rewind
To rewind the film in midroll, follow the procedure below.
Press the <Qs> button.
► Film rewind will begin.
• Make sure the <@> icon is blinking, then
take out film cartridge.
If you teke out the filmcartridge in midroll vwthout rewinding thefilm and Ihen load
a new roll of film and press the shutter biAon completely, the new film will only
rewind into the cartrid^. Before loading a new roll of film in this case, dose the
camera bade and press the shutter button.
16