Canon Rebel T2 300X - Manual (Page 42)

^Auto Exposure Bracketing (AEB)^
With AEB, the camera automatically changes the exposure within the set range
(up to +/—3 stops in 1/2-stop increments) for three successive frames.
I
Move the <^> arrow to the <^>
icon.
• Look at the LCD panel and press the
<FUNC> button. ((2)6)
^ Set the desired AEB amount.
AEBartvxjit
AEB range
standard exposwe
Turn the <£o^> dial.
Press the shutter button halfway to return
to normal camera operation,
^ Take the picture.
decreaBed exposure
■жцдлмшшре
increased exposure
The three bracketed shots will be exposed
in the following sequence: standard
exposure, decreased exposure, and
increased exposure.
As shown on the left, the respective
bracketing amount will be displayed as
each bracketed shot is taken
The picture will be taken in the current film
advance mode.
After the three AEB shots are taken, the
AEB will not be canceled automatically To
cancel AEB, set the AEB amount back to
“
00
"
Ш ' During AEB shooting, the <^> arrow vm II appear next to the <Щ^> icon and
the AEB level <Ш> will be dsplayed. In the viewfinder, the <■)('> icon will blink.
’ In the <Qi>f<ltti advance mode, the camera dopsshc^ng automatically after
taking the three AEB shots. In the <□> (single frame) mode, press the shutter
button completely three tlm^ to take the three AEB shots.
' If you use self-timer or remote control, the three AEB shots will be taken
continuously automatically.
' AEB can be combined w№ exposure compensation
' AEB carux)l be used with flash or bJb e>posi£es.
40