I multiple exposures, Depth-of-field preview, Ipl multiple exposures – Canon Rebel T2 300X User Manual
Page 44: Expoeures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I Multiple Exposures^
Since the film is not advanced after each shot, you can expose multiple shots on
the same frame. You can expose up to nine shots on a single frame._________
I
Move the <^> arrow to the <Ig]> icon.
• Look at the LCD panel and press the <FUNC,> button, ((2)6)
►
“I"
will be displayed-
2
Set the desired number of multiple exposures.
• Turn the <£^> dial.
• Press the shutter button halfway to return to normal camera operation.
Take the picture.
^ After you take all the multiple exposures, the film advances to the next
frame automatically and the multiple-exposure setting is canceled.
41 If you shoot mUtlpie
expoEures
oh the first few
or
last few frames of a roll, the
mjtt^ etposures not be precisely aligned due to the film curling.
Q • CXtffng mjttipio-expoGure shooting the <^> arrow next to the <Hi> icon on
the ICO panel will bfir^
• To cancel rmitlplo exposuras before shoottng, set the niffnber d muttiple
exposures to“/”
• To carrcel muttiple exposures after shooting, follow steps 1 and 2 to set the
ni£Tiber of multiple exposures to blank
Depth-of-Field preview*
When you press the depth-of-field preview
button, the camera will stop down the
diaphragm to the current aperture, You can
then see the range of acceptable focus in
the viewfinder.
When you pre^ the depth-of-field preview button, the exposure setting will be
locked (AE lock).
42