AVer EH1116H-4 Nano user manual - Manual (Page 27)

21
Name Function
(10) Status bar Display the current date, time, hard disk free space and temperature of unit.
(11) Camera ID Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
(12) Snapshot Capture and save the screen shot in *.jpg format.
i
Please plug the USB pen drive to DVR server before press Snapshot button.
(13) Event log Show the record of activities that take place in the system. (see also Chapter 2.2.3 )
(14) AutoScan Start/Stop video screen cycle switch.
(15) Full screen View in full screen. To return, press the right button of the mouse or ESC on the keyboard or
click the arrow icon.
Click to exit from
full screen mode
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
(16) Alarm Alert and display warning info.
(17) Turbo
To improve the smoothness of live video. The default is enabled( ), but in following
situation:
- The channel is IPCam and is in 1-split screen.
- The channel is remote DVR and is in 1-split screen.
Turbo function setup is in depended for each channel. To turn off turbo function( ), click
turbo button.
[Note] In multiple split screen mode, the turbo button is invisible.
(18) Virtual Keyboard Click to enable virtual keyboard.
The turbo button is
invisible in multiple
split screen mode.