AVer EH1116H-4 Nano user manual - Manual (Page 93)

87
- Motion Recording
Start recording the video from the selected camera only when the system detects movement. Once a motion is
detected, the system automatically saves the previous frames and stop based on the Start Record Prior and
Stop Record After settings.
- Smart Recording
Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is
no motion, it records at the minimum frame rate setting.
- No Recording
The system
won’t do any recording.
(3) Motion Detection
Adjust the sensitivity of the motion detection. The higher the value, the finer the sensitivity is detected. When it
detects a motion, a green triangle mark would appear at the upper left corner of the screen.