AVer EH1116H-4 Nano user manual User Manual

Page 43

Advertising
background image

37

2. In the POS Mapping dialog box, click OK to accept the settings and Cancel to exit without saving the new

setting.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(1) Name: Enter a name to identify the POS.
(2) Protocol: Select the protocol.
(3) Skip first:
Set the number of lines you want to be removed.
(4) Font Color:
Select the text color of the POS data.
(5) Port Setting : Select the Local(Com port) where it is connected and Baud Rate. If users just need to

connect to one POS device, they can connect AVer

TM

USB2RS232 Box to the com port

of EH1000H-4 Nano/Nano

+

DVR, and select COM 1. If users need to connect to 2

nd

POS device, please connect AVer

TM

USB2RS232 Box to the front USB port , then

connect to AVer

TM

Data Box to the port 1 of AVer

TM

USB2RS232 Box, and select COM

2.

(6) Map to Channel: Select to which camera number to display the transaction text.

(7) Text Filter: Enter the word you want to be removed.

(11) Miscellaneous

Playback mode: Select the mode of playback the video.

Select date and time: Select the date and time which user wants to playback.
Play the last file: Automatically playback the video from the last hour

Instant Playback: Automatically playback the video which has just recorded

Playback with key frame only in 4-split screen: Enable to only playback key frame when in 4-split

screen playback mode.

Enable Intelligent Streaming of IP camera: The DVR now supports 2 streaming in AVer

TM

SF1311H

IP camera series; 1

st

streaming (recording streaming) and 2

nd

streaming; in preview mode and

remote site. When user has enabled intelligent streaming function, the IP camera will be used 1

st

streaming (recording streaming) in single screen of preview mode. The recording streaming frame

rate value is depended on the setting that user has setup in advanced setting of IP camera (see also

Detail

of

(5) IP camera information

in

Chapter 3.2.1

). If IP camera is in split screen mode, the 2

nd

streaming will be used and the frame rate is 15fps in CIF resolution. For remote application (PCViewer

or Remote Console), the 1

st

streaming will be used when video quality is set to high and 2

nd

streaming

will be used when video quality is set to normal.

Click ? mark will show up the intelligent streaming information dialog box.

Advertising