AVer EH1116H-4 Nano user manual User Manual
Page 74
68
Name
Function
(6) Archive
To select the video file source for playing.
1. DVR Recorded File (HD): To playback the recorded video from the hard disk which was
recording video on the DVR system. (see also
2.
Backup File(.dvr): The file is backup and save in *.dvr file format. (see also
3.
Backup File (.avf): The file is backup and save to external USB storage device in *.avf
format. Select the file source folder and click OK to playback (EH1000H-4 Nano/Nano
+
series doesn
’t support *.avf file format).
(7) Status bar
Display the recorded date, time and play speed.
(8) Language
To switch DVR application UI language.
(9) Advanced
Advanced function is including :
HDD Backup: to call out HDD Backup application. (see also
iEnhance: to call out iEnhance application. ( see also
Chapter 6
)
AVF to AVI:
save *.avf file format as *.avi file format.
(10) Export
Export includes Snapshot, Print, and Output Video Clip function.
Snapshot: Capture and save the screen shot either in *.jpg or *.bmp format.
Print: Print the screen shot.
Output: Save the segmented file in *.avi format
(11) Segment
Keep a portion of the recorded video (see also
(12) Full screen
Use the entire area of the screen to only display the video. To return, press the right button
of the mouse or ESC on the keyboard.
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
(13) Camera ID
Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
i
When back file is opened by date (Open date), the camera ID button is available.
(14) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second(see also
i
When back file is opened by date (Open date), the Visual Search is supported.
(15) Find Next
Search for the next event or changes in the motion detector frame. You can use this when
you are using Intelligent Search or Event Search function.
(16) Event Search
Search from the recorded activities that take place in the system (i.e., Sensor, Motion, Video
Loss, POS)(see also
(17) Intelligent Search
Search the changes in the motion detector frame (See also
(18) Sound /Sound bar
-
Turn on and off the sound
-
Increase and decrease the volume
(19) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement.