AVer EH1116H-4 Nano user manual - Manual (Page 44)

38
Date Format
Select the date format which wants to display in select date and time playback mode
Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the
next video in cycle depending on the set time gap.
Activate CPU meter after system boot up
Mark to enable the CPU usage status display on the screen automatically when system boot up. User
can manually to enable by clicking the CPU Meter button.
(12) Login
Enable the conditions in Login section you want the system to automatically carry out.
- Auto Login after system boot up
Execute the DVR when the operating system is started.
- Auto Record after system boot up
Automatically start video recording when the DVR is executed.
- Auto start Network after system boot up
Automatically start network connection when the DVR is executed.
- Default user
Automatically log in to the selected default user when the DVR is executed.
(13) Date and Time Setting
Mark Daylight Saving Time to enable daylight saving function.
- Daylight Saving Time: Click Setting to setup Start and End Date/Time. User can depends on daylight
saving time mode in your country to select Mode 1 or Mode 2. Mode 1 is setting up specific start date/time
and end date/time. Mode 2 is setting up fixed day of month in every year for start and end date/time.
CPU usage status.
Click X to close the
display.