Detex Delayed Egress With Magnetic Lock - Manual (Page 7)

for added security
Slide and mount endcap
to endcap bracket with two
1/4-20x1" PPH machine screws
or #14 self-drilling screws.
DO NOT OVERTIGHTEN
4
Level pushpad assembly.
Note: Endcap Bracket must bottom-out
on extrusion. DO NOT REMOVE
NYLON SPACER ON BACK OF
BRACKET!
Install (2) 6-32 FH Screws
IMPORTANT:
For 1/4-20 machine screws drill #7 holes.
For #14 self-drilling screws no pilot holes
necessary.
For sex nuts drill 3/8" holes.
3
With pushpad assembly level,
secure the endcap bracket to door
by tightening the factory installed
self-drilling screw.
2 1
103182 Page 7