Snap in glazing pocket, 1) snap-in glazing pocket end prep, 2) screw applied glazing end preps – EFCO 406 (T) Series User Manual
Page 18: Fig. # 14, Fig. # 13
Advertising
D - SNAP-IN GLAZING POCKET &
SECTION III FABRICATION
SCREW APPLIED GLAZING
1) SNAP-IN GLAZING POCKET END PREP
BACK WALL OF PART AS SHOWN.
NOTCH THROUGH GLAZING TRACKS AND
2) SCREW APPLIED GLAZING END PREPS
#9250
THIS END
TO TRANSOM BAR
.188
.358
VERTICAL D.L.O. - 1/32"
CUT LENGTH =
1.781
.188
NOTE:
.358
THIS END
TO TRANSOM BAR
.358
VERTICAL D.L.O. - 1/32"
CUT LENGTHS =
Fig. # 14
1.780
#9133
Fig. # 13
.188
.173
#8403
PAGE 16
DPS 12/2002
406 STOREFRONT
Advertising