KMC Controls REE–4002 - Manual

Installation Guide
Relay Module Fan Box Control
REE–4002
Mounting
•
The REE–4002 may be mounted directly to a
control box surface or in a 2" x 4" electrical handy
box.
•
Add a blank cover to conceal the module.
Required Tools
• digital voltmeter
• small phillips screwdriver
• small flatblade screwdriver
KMC Controls
P.O. Box 497
19476 Industrial Drive
New Paris, IN 46553
U.S.A.
TEL: 574.831.5250
FAX: 574.831.5252
E-mail: [email protected]
Maintenance
No routine maintenance is required, however
protection from extremes of humidity and dirt is
recommended.
Careful installation will also ensure long term
reliability and performance.
810-019-02 F
Wiring
• Supply the unit with 24 VAC, +20%/-15%
• A DC Voltmeter is shown across terminals “X” and
“9“ to measure the fans setpoint for recalibration. The
setpoint is factory calibrated at 3 VDC.
• Check graph for output over a 0–6 VDC.