Kontron VMP3 - Manual (Page 100)

NetBootLoader VMP3
Page 5 - 16 © 2005 Kontron Modular Computers GmbH ID 29230, Rev. 01
29230
.01.UG.VC.050727/091439
P R E L I M I N A R Y
5.7 Commands
The following commands are available with the NetBootLoader. Where an ellipsis (…) appears
in the command syntax it means that the command is continued from the previous line. Ob-
serve any spaces that may be between the ellipsis and the remainder of the command.
ABORT
FUNCTION: Terminate the NetBootLoader boot operation
SYNTAX:
abort
DESCRIPTION: This command is used by the operator to terminate the boot
operation during the boot wait time to allow the operator to perform
other NetBootLoader operations. To be asserted it must be issued
during the boot wait time which is indicated by the alternating
assertion of the MC6 (LED1) signal.
BW
FUNCTION: Set or display the parameters of the boot wait function of the
NetBootLoader
SYNTAX:
bw [<time>| -f]
where:
bw command
<time> parameter: value: seconds
0, 1, 2, 5, 10, 20, 50
-f option:
force CRC update