Kontron VMP3 - Manual (Page 103)

VMP3 NetBootLoader
ID 29230, Rev. 01 © 2005 Kontron Modular Computers GmbH Page 5 - 19
29230
.01.UG.VC.050727/091439
P R E L I M I N A R Y
CD
FUNCTION: Change the current ftp server directory
SYNTAX:
cd <new-path>
where:
cd command
<new-path> parameter: string
new directory path
DESCRIPTION: If an ftp server session has been established with the “login”
command, the command “cd” is used to change the current ftp server
directory.
The argument “<new-path>” may be an absolute or relative path. The
format depends on what the server accepts. For example, UNIX
hosts require that the directory names must be entered exactly in the
same case.
CHECK
FUNCTION: Verify validity of application programmed to FLASH
SYNTAX:
check
DESCRIPTION: When an application is programmed to FLASH, a CRC is performed
and the results are stored in FLASH along with the application. The
“check” command provides status information for the current
application images in FLASH.
USAGE: Verify valid application is stored in FLASH
COMMAND / RESPONSE:
check
Checking Image: 0
check image crc: ok
length in flash: 0x0053d004
sectors used : 84