Kontron VMP3 - Manual (Page 42)

Functional Description VMP3
Page 2 - 8 © 2005 Kontron Modular Computers GmbH ID 29230, Rev. 01
29230
.01.UG.VC.050727/091420
P R E L I M I N A R Y
2.4 VMP3 Board Interfaces
The following sections provide a specific information regarding the application interfaces avail-
able with the EBC-VME3 board.
2.4.1 J10 – VME Interface
The VME interface is based on the TUNDRA UNIVERSE II Bridge which includes the following
features required for 3U VME systems.
• A24/A16 addressing modes capability
• D16/D8 data transfer capability
• Automatic First-Slot-Detection
• Single level BR3 arbitration release-when-done
option
• FAIR VMEbus arbitration option
• ACFAIL NMI option
• SYSFAIL IRQ option
• System controller functions (SYSCLK, Bus
monitor, Power monitor)
• Compatibility with Kontron 3U VME system
addressing schemes
• Compatibility with Kontron VME backplane
design and feature set
• Compatibility with Kontron backplane transceiver
logic
The following figure and table provide pinout and signal
information for this interface.
Figure 2-2: J10 - VME Connector
PINROWS
C B A
1
32