Kontron VMP3 - Manual (Page 33)

VMP3 Introduction
ID 29230, Rev. 01 © 2005 Kontron Modular Computers GmbH Page 1 - 13
29230
.01.UG.VC.050727/091420
P R E L I M I N A R Y
1.5 Applied Standards
The Kontron Modular Computers’ VMP3 board complies with the requirements of the following
standards:
Table 1-3: Applied Standards
COMPLIANCE TYPE STANDARD TEST LEVEL
CE Emission EN55022
EN61000-6-3 --
Immission EN55024
EN61000-6-2 --
Electrical Safety EN60950 --
Mechanical Mechanical Dimensions IEEE 1101.10 --
Transport and Storage IEC 61131-2 --
Environmental and
Health Aspects Vibration (sinusoidal) IEC60068-2-6 10 - 300 [Hz] / 5 [g] / 1 [oct / min]
10 [cycles / axis]
3 [axis: x, y, z]
Shock IEC60068-2-27 30 [g]
9 [ms]
3 [shocks per direction]
5 [s] recovery time
6 [directions, ±x, ±y, ±z]
Bump IEC60068-2-29 15 [g]
11 [ms]
500 [shocks per axis]
1 [s] recovery time
3 [axis: x, y, z]
Vibration, broad-band
random (digital control)
and guidance IEC60068-2-64 20 - 2000 [Hz] / 3.5 [g RMS]
30 [min.] test time / axis
3 [axis: x, y, z]
Climatic Humidity IEC60068-2-78 93% RH at 40°C, non-condensing