Kontron VMP3 - Manual (Page 102)

NetBootLoader VMP3
Page 5 - 18 © 2005 Kontron Modular Computers GmbH ID 29230, Rev. 01
29230
.01.UG.VC.050727/091439
P R E L I M I N A R Y
CBL
FUNCTION: Set or display the parameters of the bootline function
SYNTAX:
cbl <num> [<bootline>]
where:
cbl command
<num> parameter: value: string “0, 1, 2, 3, c”
ID number of the image to be associated with the
bootline or bootline which is common to all images
<bootline> parameter: value: string (max. of 256 characters)
defines the bootline to be used with the kernel
indicated by <num> or the common bootline
DESCRIPTION: When an application image is programmed to FLASH, it is assigned
an ID number (0, 1, 2, or 3). This number is used to identify which
image is to be addressed by the command “cbl”.
In addition, a bootline common to all images may also be defined
using the “c” parameter.
If the command “cbl” is invoked with only the <num> parameter, it
returns the bootline for the image specified or the common bootline.
Invoking the command “cbl” with the <bootline> parameter
overwrites any previous bootline for the image specified.
USAGE: Display the bootline for image 2
COMMAND / RESPONSE:
cbl 2
<contents of the bootline of image 2>