Vmp3 netbootloader – Kontron VMP3 User Manual
Page 101
VMP3
NetBootLoader
ID 29230, Rev. 01
© 2005 Kontron Modular Computers GmbH
Page 5 - 17
29230
.01.UG.VC.050727/091439
P R E L I M I N A R Y
DESCRIPTION:
The command “bw” displays the parameter “<time>” setting.
The parameter “<time>” stipulates the waiting time in seconds that
the boot operation is delayed before the application is loaded and
started. No values other than these are supported.
Bear in mind when setting the boot wait time that the MC6 (LED1)
signal is asserted alternately at the rate of two times a second.
Therefore, if the boot wait is set to 1 second the MC6 signal will only
be alternately asserted two times.
The option “-f” is used to force updating of the CRC value of boot
section of the EEPROM.
For further information refer to chapter 5.4.3.1.
USAGE:
Display setting of “<time>” parameter
COMMAND / RESPONSE:
bw
WaitTime: 20
Set boot wait time to 50 seconds
COMMAND / RESPONSE (none):
bw 50
Set boot wait time to 0 seconds
COMMAND / RESPONSE (none):
bw 0
Choosing a waittime of 0s will make a
network login impossible
BYE
FUNCTION:
Terminate an ftp server session
SYNTAX:
bye
DESCRIPTION:
An ftp server session which has been established with the command
“login” is terminated with the command “bye”.
BW