Kontron AM4204 - Manual (Page 26)

11 AM4204
www.kontron.com
* When XAUI is used, the Octeon Block for the connection will be PKO/IPD port 0, QLM1 GMX0 index 0.
2.9 Front Panel LEDs
Figure 2-2: Front Panel of AM4204
7 Fat Pipe PCIe Port 0 (Lane 3) -
8 Fat Pipe XAUI lane0 or GbE eth2/octeth0 PKO/IPD port 0, QLM1 GMX0 index 0*
9 Fat Pipe XAUI lane1 or GbE eth3/octeth1 PKO/IPD port 1, QLM1 GMX0 index 1*
10 Fat Pipe XAUI lane2 or GbE eth4/octeth2 PKO/IPD port 2, QLM1 GMX0 index 2*
11 Fat Pipe XAUI lane3 or GbE eth5/octeth3 PKO/IPD port 3, QLM1 GMX0 index 3*
12 Extended - -
13 Extended - -
14 Extended - -
15 Extended RS232 -
17 Extended - -
18 Extended - -
19 Extended - -
20 Extended - -
TCLKA Clock From Backplane -
TCLKB Clock - -
TCLKC Clock - -
TCLKD Clock - -
FCLKA Clock PCIe Reference Clock -
Note:
The GbE interfaces on ports 8 to 11 are named eth2 to eth5 in the operating system and octeth0 to
octeth3 in the bootloader.
Port Region Connection Octeon Block