3 oem set serial configuration, 4 oem set control state – Kontron AM4204 User Manual
Page 57
Advertising
42
www.kontron.com
5.1.3.3
OEM Set Serial Configuration
Example: Using onboard
ipmitool –l 3 raw 0x30 0x06 0xab 0xca 0xca 0xce 0xc9 <setting>
5.1.3.4
OEM Set Control State
• The MMC shall support the following Control Ids
• The MMC shall save and restore these settings.
• The MMC shall immediately restart the payload of the module on change of the “interface settings”.
Command Name
LUN
NetFn
Command Number
OemApSetSerialconfig
3
0x30
0x06
Byte Num
Data Field / Byte Raw
Request Data
1...5
0xAB 0xCA 0xCA 0xCE 0xC9
6
MUX setting
Response Data
1
Completion Code
Command Name
LUN
NetFn
Command Number
CmdSetControlState
0
0x3E
0x20h
Advertising