Kontron OmniClient - Manual (Page 31)

OmniClient – User’s Guide (V1.01)
30 www.kontron.com
8.
Accessing Internal Components
This section contains important information that you must read before accessing the internal
components. You must follow these procedures properly when installing, removing or handling
any board.
Please consider following instruction when you install (or remove) expansion cards.
The HDD, the expansion cards, and the Lithium battery are located in an
“OPERATOR ACCESS AREA”. The area behind the access door designed as
“OPERATOR ACCESS AREA” may only be opened for installing/removing of HDDs,
expansion cards, or replacing the Lithium battery by qualified specialist personnel
according to the description in this user’s guide.
The PC Box may only be opened in accordance with the description in this user’s
manual for:

Installation and removal of HDDs

Installation and removal of PCI/PCIe expansion cards

Replacing of the Lithium battery
These procedures have to be carried-out only by qualified specialist personnel.
To expand your system with additional cards, please take care that each
additional card should not exceed a power consumption of 25W.
The access door and HDD drive tray must be secured by the included screws
during operation.
Please consult the documentation provided by the manufacturer of the expansion
card for instructions before attempting to install/remove an expansion card
into/from the OmniClient.
Please observe the safety instruction for handling assemblies with static sensitive
device.
Failure to take heed of this warning instruction can result in damage to the device.