Kontron OmniClient - Manual (Page 48)

OmniClient –User’s Guide (V1.02)
www.kontron.com 47
12.4. DP Connectors (DP0/DP1)
The DP (Display Port) are based on standard DP type Foxconn 3VD51203-H7JJ-7H or Similiar.
Figure 3. DP Connector, front view
Table 13: DP Connector
Pin Signal Description Type Note
1 Lane 0 (p) LVDS
2 GND PWR
3 Lane 0 (n) LVDS
4 Lane 1 (p) LVDS
5 GND PWR
6 Lane 1 (n) LVDS
7 Lane 2 (p) LVDS
8 GND PWR
9 Lane 2 (n) LVDS
10 Lane 3 (p) LVDS
11 GND PWR
12 Lane 3 (n) LVDS
13 Config1 Aux or DDC selection I
14 Config2 (Not used) O
15 Aux Ch (p)
Aux Channel (+) or DDC
Clk AUX (+) channel used by DP
DDC Clk used by HDMI
16 GND PWR
17 Aux Ch (n)
Aux Channel (-) or DDC
Data AUX (-) channel used by DP
DDC Data used by HDMI
18 Hot Plug I Internally pull down (100Kohm).
19 Return PWR Same as GND
20 3.3V PWR
Fused by 1.5A resetable PTC fuse, common for
DP0 and DP1