Kontron OmniClient - Manual (Page 37)

OmniClient – User’s Guide (V1.01)
36 www.kontron.com
9.
Installation Instructions
The OmniClient has to be installed and operated only by trained and qualified
personal.
The mounting and operation of the OmniClient is only the vertical position with the
interfaces downwards.
The unit must be placed such that there is sufficient space for connecting the cables
to the I/O interface connectors and for operating the power switch.
Leave at least 5 cm (approx. 2") of free space around the unit to prevent the device
from possibly overheating! Do not obstruct the air intake and exhaust openings.
The voltage feeds must not be overloaded. Adjust the cabling and the external
overload protection to correspond with the rated voltage range indicated on the
type label.
The type label is located on the right side of the system.
The rear access panel must be secured by the supplied screws during operation.