Rice Lake 480 Legend Series Digital Weight Indicator Installation Manual - Manual (Page 39)

Configuration 35
3.3.7 Password Menu
The PASSW menu is used to edit or set passwords.
Figure 3-16. Password Menu
Enter 999999 to reset password, this will also reset the configuration back to default values.
3.3.8 Test Menu
Access to this menu requires the configuration password, if it has been enabled.
Figure 3-17. Test Menu
Digital output relay test.
HI = Active = ON
LO = Inactive = OFF
PASSWORD Menu
Parameter Choices Description
CNFG 0
0 – 999998 Edit configuration password. 0 = no password
If enabled, the configuration password is used for electronic sealing of the
indicator. When configuration password has been entered, the existing
configuration password is required to edit. Entering this menu requires the
SETUP switch to be pressed.
USER 0
0 – 999998 Edit user password. 0 = no password
If enabled, the user password restricts access to the setpoint, serial and print
formatting menus. Once a user password has been entered, the existing user
password is required to edit parameters.
Table 3-13. Password Menu Parameters
CONFIG FORMAT CALIBR PROGRM DIG IN ALGOUT PASWRD TEST MENU
CNFG USER
000000 000000
Note
Note
Important
Note
CONFIG FORMAT CALIBR PROGRM DIG IN ALGOUT PASWRD TEST MENU
WGMNST
999999
DIGOUT
1 - 4
HI
LO
DIGIN
1 - 4
VIEW
NWGMNT
OVRCAP
TOTAL
ADTEST
Raw A/D
Counts
ALGOUT
0
25%
50%
100%
DEFLT
Note