Rice Lake 480 Legend Series Digital Weight Indicator Installation Manual - Manual (Page 9)

Introduction 5
1.4 LED Annunciators
The 480 display uses a set of eight LED annunciators to provide additional information about the value being
displayed.
See Section 3.3.2 for more information about configuring primary and secondary display units.
LED Description
Gross/Brutto LED
Gross weight display mode (or Brutto in OIML mode)
Net LED
Net weight display mode
Zero (Center of Zero) LED
The Center of Zero LED indicates that the current gross weight reading is within +/- 0.25 display divisions of the
acquired zero, or is within the center of zero band.
A display division is the resolution of the displayed weight value, or the smallest incremental increase or decrease
that can be displayed or printed.
Standstill LED
Scale is at standstill or within the specified motion band. Some operations, including Zero, Tare and Printing, can
only be done when the standstill LED is on.
lb/kg LED
Displays which unit of measure is being used.
lb and kg annunciators indicate the units associated with the displayed value: lb = pounds, kg = kilograms.
The displayed units can also be set to short tons (tn), metric tons (t), ounces (oz), grams (g), NONE (no units
information displayed). The lb and kg LEDs function as primary and secondary units annunciators. If neither
primary nor secondary units are lb or kg, the lb annunciator is lit for primary units and kg is lit for secondary units.
T LED
Indicates that a push-button tare weight has been acquired and stored in memory.
PT LED
Indicates that a preset tare weight has been keyed in or entered and stored in memory.
Table 1-1. LED Annunciators