SINGER 7467S CONFIDENCE STYLIST - Manual (Page 80)

78
EVEN FEED / WALKING FOOT
Even feed / Walking foot enables you to sew hard-to-sew
fabrics without sliding nor slipping and with perfect matching.
Use it for sewing leather, ultra suede, shiny fabrics (vinyls,
patents and satins), bonded fabrics, pile fabrics and matching
stripes, plaids and patterns. It is not recommended for use
when stretch stitching.
To attach the even feed / Walking foot;
1. Raise needle to its highest position.
2. Raise presser bar to its highest position and guide the
even feed / walking foot into position from rear of machine
with arm on needle clamp.
3. Attach presser bar clamp to presser bar and tighten presser
foot screw with screwdriver.
TWIN NEEDLE (Option)
A twin-needle produces two rows of parallel stitches for pin
tucks, double top stitching and decorative sewing.
Use of a Singer Brand 3mm (Style 2025) Twin Needle is
strongly recommended.
THREADING THE TWIN NEEDLE
1. Insert the second spool pin. Place a spool on each spool
pin. Thread the two threads as one. Draw one thread
through each needle from front to back.
2. Pick up bobbin thread as for single needle sewing. Pull the
three threads together under the presser foot to the back of
the machine, leaving about 6” (15 cm) of thread.
NOTE: Needle threader cannot be used to thread the
twin needle.
Helpful Hints:
1. Always move the stitch width to the Twin Needle
Mark prior to selecting a pattern. This will preclude
any possibility of the twin needle breaking.
2. Turning off the machine returns the machine to
normal sewing mode. Twin Needle is only active
when the Twin Needle Switch is lit red.
Needle clamp
Serre aiguille
Tornillo para sujetar la aguja
Presser foot screw
Barre pied-presseur
Tornillo del pie prensatelas
Presser bar
Barre pied-presseur
Barra de prensatelas
Arm
Fourche du pied
Brazo tenedor
Presser bar clamp
Attache du pied
Tornillo de la barra
prensatelas