SINGER 7256 FASHION MATE Instruction Manual User Manual

Page 60

background image





5. Carefully mark the position of buttonhole on your garment.

6. Place the fabric under the foot. Pull out the bobbin thread

underneath the fabric to a length of about 4 inches to the


7. Align the buttonhole mark on the fabric with the mark on

the buttonhole foot, and then lower the buttonhole foot.

8. While holding the top thread, start the machine.

* Sewing will be completed automatically in the following order.

9. When sewing is finished, use a buttonhole opener/seam

ripper to open up the fabric in the center of the buttonhole.

Be careful not to cut any of the stitching.

Buttonhole foot alignment position

Position d’alignement du pied boutonnière

Posición de alineación del pie de ojaladora

Fabric marking

Marque du tissu

Marca de material

Fabric marking

Marque du tissu

Marca de material

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7

This manual is related to the following products: