SINGER 14T967DC QUANTUMLOCK - Manual (Page 21)

3
3
9
10 11
8
1
7
5
6
4
3
2
1
2
2
20
While holding thread with fingers, pass it between
the tension discs and pull thread down to make
certain it is properly located in between the tension
discs 3.
3) Threading the (Brown) Chain Stitch/Cover stitch Looper
Thread the chain stitch/cover stitch looper as indicated
1~11.
Thread the top cover
thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull thread
along the right side of
button as illustrated.
Pass thread from back to the front through the
thread guide 1.
Raise Presser foot by lowering presser bar lifter to
release Tension discs.