SINGER 14T967DC QUANTUMLOCK - Manual (Page 32)

(3/8")
9.8 mm
ne dle e
7.8 mm
Chain stitch
(5/16")
Left ne dle e
(13/64")
7 mm
(17/64")
5 mm
Right ne dle e
3 mm
(1/8")
5 mm
(3/16")
needle
8.8 mm
Chain stitch
(11/32") (10/64") (15/64")
Left ne dle e Right ne dle e
6.0 mm 4.0 mm
31
14. HOW TO ADJUST THE STITCH
LENGTH
The stitch length dial should be set on the N
setting for most sewing conditions.
Adjust the stitch length to N~ 4 when sewing
heavy weight fabrics.
Adjust the stitch length to 2~N when sewing
lightweight fabrics to obtain excellent seams
without puckering.
15. HOW TO ADJUST THE SEAM
WIDTH
Overedge seam width can be achieved by
repositioning the needle position and also with the
width adjustment knob.
Width Adjustment by Changing Needle Position
Overedge seam width can be adjusted by changing
the needle position.
a) When using left needle.................................6 mm
(15/64 inch)
b) When only right needle is used....................4 mm
(10/64 inch)
c) When using chain stitch needle.................8.8 mm
(11/32 inch)
Width Adjustment with Adjustment Knob
Use of width adjustment knob will permit further
adjustment within the width range shown below.
a) When using left needle...............................5 ~ 7 mm
(13/64 ~ 17/64 inch)
b) When only right needle is used............3.0 ~ 5.0 mm
(1/8 ~ 3/16 inch)
c) When using chain stitch needle............7.8 ~ 9.8 mm
(5/16 ~ 3/8 inch)
4
3
N
2