SINGER 14T967DC QUANTUMLOCK - Manual (Page 6)

Seams also can be sewn at desired
A 4 mm and 6 mm overlock seam width
ideal for flatlock (butted or lapped) seams
overedging and seaming on common
stitching with decorative thread. Also,
Mock Safety such as tricot and spandex.
Stretch Mock for medium to heavyweight stretchy
1. SELECTION OF STITCHES & AUTO TENSION
This machine is capable of producing various types of stitches according to the combination of Auto Tension
Selected, needle positions, threading methods, and the use of convertible right looper/spreader.
Stitch Type Reference
Page
1. Double A 1-needle 2-thread straight stitch is used
Chain Stitch for construction or decorative stitching.
39
distance from edge of fabric by
disengaging the right looper and movable
knife.
2. Two-thread 1-needle 2-thread stitch is used for
Wrapped Edge
Overlock
It is also ideal for rolled and blind hemming.
41
can be obtained by changing the needle
position.
3. Two-thread 1-needle 2-thread stitch is used for
Overedge overedging common fabrics. It is also
42
and blind hemming. A 4 mm and
6 mm overedge seam width can be
obtained by changing the needle position.
Overlock
43 fabrics. A 4mm and 6 mm overlock seam
width can be obtained by changing the
needle position.
5. Three-thread 1-needle 3-thread stitch is used for
Flatlock butted or lapped seams and ornamental
44
a 4 mm and 6 mm flatlock width can
be obtained by changing the needle
position.
6. Three-thread 2-needle 3-thread stitch that is ideal for
Ultra-Stretch lightweight, extremely stretchy fabrics
45
Stitch
7.Four-thread Ultra- 2-needle 4-thread stitch that is ideal
46 Safety Stitch fabrics such as double knits and swim
wear.
4. Three-thread 1-needle 3-thread stitch is used for
seaming lightweight or stretch fabrics.
ATD : Auto Tension Dial Selected
ATD: D
ATD: E
ATD: B
ATD: F
ATD: G
ATD: A
ATD: A
ATD: G
ATD: D
5