SINGER 14T967DC QUANTUMLOCK - Manual (Page 27)

4 5 8
9
7
6
3
2
9
1
8
9
7
6
4
5
26
(2) Threading the Cover Stitch Middle / Chain Stitch
Needle (Blue) (D on needle clamp)
Thread the cover stitch middle / chain stitch
needle as indicated 1~9.
Continue to thread points 4~8.
Note: Slide thread into front slot on thread
guide 5 and slot of take-up lever
cover 6. Then slip thread into left slots
of thread guides 7 and 8.
Thread the eye of the left needle 9.
Note: Use of tweezers in the accessory case
will make needle eye threading easy.
Draw about 10cm (4 inches) of thread through
needle eye to hang free.
Place the thread to the back, under the presser
foot.
Before threading eye of needle, make sure thread
is
located on the bottom in front of thread guide
of the needle clamp.
Raise the Presser foot
to release Tension discs. by lowering presser bar lifter