SINGER 14T967DC QUANTUMLOCK - Manual (Page 26)

3
2
3
2
7
1
9
8 5
6
1
4
3
2
25
6) Threading the Cover Stitch Needles
While holding thread with finger, pass it between
the tension discs and pull thread down to make
certain it is properly located in between the
tension discs 3.
Thread the top cover
thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull thread
along the right side of
button as illustrated.
Thread the cover stitch left / chain stitch needle as
indicated 1~9.
Pass thread from back to the front through the
thread guide 1.
Raise Presser foot
to release Tension discs. by lowering presser bar lifter
(1) Threading the Cover Stitch Left Needle
(Orange) (C on needle clamp)