SINGER 14T967DC QUANTUMLOCK - Manual (Page 29)

2
2
1
9
6
7
8 5 4
3
2
1
9
28
(3) Threading the Cover Stitch Right Needle
(Green) (E on needle clamp)
Thread the cover stitch right needle as indicated
1-9.
Pass thread from back to the front through the
thread guide 1.
Thread the top cover
thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull thread
along the right side of
button as illustrated.
Thread the eye of the middle needle 9.
Note: Use of tweezers in the accessory case will
make needle eye threading easy.
Draw about 10cm (4 inches) of thread through
needle eye towards the back of the machine.
Place the thread to the back, under the presser
foot.
Raise Presser foot by lowering presser bar lifter to
release Tension discs.