SINGER 14T967DC QUANTUMLOCK - Manual (Page 46)

45
How to Balance
Set auto tension dial to G shown at right and
test sew on a sample of your fabric.
6) 3-thread Ultra Stretch Mock Safety Stitch
Correct Balance
When the lower looper thread tension is too loose;
-Move the lower looper thread tension
lever (red) fine tuning
toward a higher . position
When the left needle thread tension is too loose;
-
the left needle thread tension (orange) Move fine tuning lever
toward a higher . position
When the right needle thread tension is too loose;
-
the needle thread tension (blue) Move fine tuning lever
toward a higher . position
NEEDLE POSITION
SEAM WIDTH FINGER KNOB N
STITCH LENGTH 2~4
SPREADER USE
Left Needle thread
Right Needdle thread
Topside
Lower looper thread
Underside
Left Needle thread
Right Needdle thread
Topside
Lower looper thread
Underside
Left Needle thread
Right Needdle thread
Topside
Lower looper thread
Underside
Left Needle thread
Right Needdle thread
Topside
Lower looper thread
Underside
Fabric
Tension Dial
Orange
Spreader
Blue Green Red Brown
Medium weight
ATD:G
Tension is automatically set when seiecting the
desired stitch type with the Auto Tension Dial (ATD).
Tension may be fine tuned with the Fine Tuning Levers
according to the following variables
1) Type and thickness of fabric
2) Needle size
3) Size, type and fibre content of thread
: