SINGER 14T968DC User Manual
Page 18
C
L
Caution:
Be sure to turn off power switch.
Thread the top cover
thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull
thread along the right
side of button as
illustrated.
While holding thread with fingers, pass it between
the tension discs and pull thread down to make
certain it is properly located in between the
tension discs 3.
Thread the upper looper as indicated 1~9.
Note: The presser foot is raised by lowering the
Presser bar lifter. The motion allows a clear
path for the fabric when sewing.
Raise Presser foot to release tension discs.
17
Pass thread from back to the front through the
thread guide 1.
Note: The instructions on this page and the following pages
will guide you through the proper threading for each
color coded threading path.
Before threading, refer to the Handy Reference Chart
for information on Stitch Types, Settings, Needle
Sockets and Color Coded Threading Paths.
1) Threading the
(Green)
Upper Looper
To Thread The Machine Correctly
1
3
3
2
2
9
6
8
7
5
4
3
2
1